Draper E Series Ceiling Recessed Electric ceiling Projection screen.

For complete flexibility in installation. May be recessed above most ceilings. Install the housing and make the electrical connections early - then store the screen until completion. White extruded aluminium case can be installed quickly and easily. Flanges around all four sides trim out the case/ceiling juncture.

Choices of screen surface are as follows
Matt White Gain 1.0
Hi Contrast Grey Gain 0.8
Glass beaded High gain screen Gain 2.1

The Draper E-Series Ceiling Recessed Electric Projector Screens Main Features Are:-

• Extra Drop—Additional drop is optional, either surface color or black. (Black is standard for Series V. Surface color is standard for Series E and M in AV format; black in other formats.) Additional drop will increase the overall length of the case and dowel of a Series V.
• Black Masking Borders—Borders are optional for Series E and M in AV format. Borders are standard for Series E and M in all other formats and for all Series V screens.
• Control Options— Controls may be built into case and will increase the overall length of case. For Series M, aluminum operating pole is available in place of factory attached pull cord.
• Screen/Case Options—You may choose left end (standard) or right end motor location.

12 Volt Trigger

Universal 12v Trigger device to control screen from projector. Accepts trigger command from 1.5v to 12v

Deluxe Wall Switch

Standard Somfy control 240v AC motor UP / Down latching switch for use with all electric screens.

Fits UK backbox.

Low Voltage Control Module

Low Voltage Controller suitable for interfacing electric screens with AMX, Crestron control systems and others.

Can also be used for IR and RF control.