Tab Tensioned Ceiling Recessed Electric screen

Draper V Series Tab Tensioned Ceiling Recessed Electric ceiling Projection screen.

White extruded aluminium case can be installed in the ceiling quickly and easily during the "dusty" phase of construction. Hanging brackets slide in a track on the top of the case adjusting to ceiling conditions. Screen can be stored independently of the case. Tab tensioned M1300 washable vinyl matt white surface is provided as standard.

Other surfaces include
M2500 Hi gain Front projection Gain 2.1
Hidef Grey Front projection Gain 0.9

Please note HiDef grey is not available in all sizes.
1:1 Max 244 x 244cm
4:3 Max 244 x 183cm
16:9 Max 295 x 160cm

M2500 surface is not available at 366 x 366cm

The Draper V-Series Ceiling Recessed Electric Projector Screens Main Features Are:-

• Extra Drop—Additional drop is optional, either surface color or black. (Black is standard for Series V. Surface color is standard for Series E and M in AV format; black in other formats.) Additional drop will increase the overall length of the case and dowel of a Series V.
• Black Masking Borders—Borders are optional for Series E and M in AV format. Borders are standard for Series E and M in all other formats and for all Series V screens.
• Control Options— Controls may be built into case and will increase the overall length of case. For Series M, aluminum operating pole is available in place of factory attached pull cord.
• Screen/Case Options—You may choose left end (standard) or right end motor location.

12 Volt Trigger

Universal 12v Trigger device to control screen from projector. Accepts trigger command from 1.5v to 12v

Deluxe Wall Switch

Standard Somfy control 240v AC motor UP / Down latching switch for use with all electric screens.

Fits UK backbox.

Low Voltage Control Module

Low Voltage Controller suitable for interfacing electric screens with AMX, Crestron control systems and others.

Can also be used for IR and RF control.